Soekris net4801

Saw this on ebay recently looks good to run dd-wrt on it but lets see..
i am amazed by its specs...
233 to 266 Mhz NSC SC1100 single chip processor
32-256 Mbyte SDRAM, soldered on board
4 Mbit BIOS/BOOT Flash
CompactFLASH Type I/II socket, 8 Mbyte FLASH to 4 Gbyte Microdrive
UltraDMA-33 interface with 44 pins connector for 2.5" Hard Drive
1-3 10/100 Mbit Ethernet ports, RJ-45
2 Serial ports, DB9 and 10 pins header
USB 1.1 interface
Power LED, Activity LED, Error LED
Mini-PCI type III socket. (t.ex for optional hardware encryption.)
PCI Slot, right angle 3.3V signaling only, dual PCI slot option planned.
12 bit general purpose I/O, 20 pins header
Temperature and voltage monitor
Hardware watchdog
Board size 5.2" x 5.7"
Power using external power supply is 6-20V DC, max 15 Watt
Option for 5V supply using internal connector
Operating temperature 0-60 °C
CompactFLASH Type I/II socket, 8 Mbyte FLASH to 4 Gbyte Microdrive
UltraDMA-33 interface with 44 pins connector for 2.5" Hard Drive
1-3 10/100 Mbit Ethernet ports, RJ-45
2 Serial ports, DB9 and 10 pins header
USB 1.1 interface
Power LED, Activity LED, Error LED
Mini-PCI type III socket. (t.ex for optional hardware encryption.)
PCI Slot, right angle 3.3V signaling only, dual PCI slot option planned.
12 bit general purpose I/O, 20 pins header
Temperature and voltage monitor
Hardware watchdog
Board size 5.2" x 5.7"
Power using external power supply is 6-20V DC, max 15 Watt
Option for 5V supply using internal connector
Operating temperature 0-60 °C
Software:
comBIOS for full headless operation over serial port
PXE boot rom for diskless booting
Designed for FreeBSD, NetBSD, OpenBSD and Linux
Runs most realtime operating systems
PXE boot rom for diskless booting
Designed for FreeBSD, NetBSD, OpenBSD and Linux
Runs most realtime operating systems
0 Comments:
Post a Comment
Subscribe to Post Comments [Atom]
<< Home